Frequently Asked Questions

Choose by cutting angle and material, not by motor power:

• 45° corners only (photo frames, picture frames, mirror frames, light box frames) → ZF-350~505 45° double-head mitre saw, two corners per cycle
• Aluminium air grille profiles → ZF-350 (higher throughput); ABS plastic air grille profiles → ZF-505 (smaller section, faster feed)
• 90° cut-off only → ZF-D350 pneumatic (automatic oil spray, burr-free cut) or ZF-405 hydraulic (0–650 mm stroke, suited to thick material)
• Variable angle → ZF-355 any-angle saw, adjustable 15°–90° with digital readout
• Automatic feeding and continuous production → ZF-JM405 automatic (355 mm blade, 50–2000 mm/min feed, pneumatic clamping)

Rule of thumb: blade diameter (305–505 mm) determines the maximum cutting width and height. Measure your largest profile section first, then pick the model.

Three turnkey configurations, selected by target capacity and floor space (figures taken from our equipment matching schedule):

The process chain is cutting (CNC nesting machine / panel saw) → edge banding (automatic edge bander, panel thickness 10–60 mm, width up to 280 mm) → drilling (CNC drilling machine / six-side centre). The three lines differ in capacity and edge banding speed (10–13 / 13–18 / 20–24 m/min). You can start at entry level and upgrade individual machines later.

Manual models cut one piece per cycle. The ZF-D350 pneumatic cut-off saw and the ZF-JM405 automatic model clamp and cut several profiles at once and are equipped with automatic oil-spray lubrication and cooling, giving a burr-free face and longer blade life. The ZF-355 CNC T-bar cutting machine also handles several pieces per cycle for V-grooving, which suits batch orders.

The ZF-305 panel light double-end saw cuts 300 / 600 / 900 type panel light profiles with pneumatic positioning and automatic clamping — no manual handling. The CNC panel light mitre saw handles a maximum working length of 1200 mm. For diffuser plates, the ZF-305 automatic panel cutting machine (reciprocating saw) processes a full 1220 × 2440 mm sheet up to 60 mm thick and cuts acrylic, aluminium, wood and PVC on the same machine.

The ZF-CNC1330 CNC single-head engraving machine has a repeat positioning accuracy of 0.02 mm and an effective working area of 3000 × 1220 × 200 mm. It runs a Taiwan Baoyuan / Syntec control system with an 18,000 r/min spindle (air-cooled 6.0 kW × 3 or water-cooled 7.5 kW), and processes acrylic light boxes, engraving and cutting, aluminium sheet, dual-station grooving, ACP and PVC.

The CNC polygon profile bending machine reaches a minimum bending radius of 50 mm with ±0.02 mm repeat positioning accuracy, up to nine sets of dies, PLC program control and stepless speed regulation. It forms arcs, ellipses, mirror frames and similar profiles. For standard bends, an electric bending machine does the job at lower cost.

We support equipment export and can help confirm the customs clearance method and sea freight or LCL arrangements (the specific terms are agreed in the contract). Every machine is trial-run and inspected before leaving the factory, and English documentation and technical support are available.

Contact: WhatsApp / Phone +86 18144701508 (Mr. Liu). Send us a profile cross-section drawing or product photos for selection advice and a quotation.